How to make a fake id After editing is done, you can start printing. You need to print on synthetic paper. There are two types of synthetic paper, which is almost the same. Teslin paper and a layer Artisyn silica-filled, polyolefin printing substrate with unique microporous and temperature resistance characteristics that make the product of choice for laminated badges. Teslin is more expensive and less versatile than Artisyn. Want a desktop inkjet printer, you better results with Artisyn Artisyn or extreme nano � synthetic paper. Printing on Teslin with the jet does not work very well and tends to look grainy and smear. Artisyn and Artisyn extreme nano � coated with chemicals to absorb the ink effectively. This is cheaper than Teslin, works well with all types of printers, including inkjet and laser printers. It also contributes to better results for quality prints. They are available from online sources. Arcadia also sells perforated sheets that blow in the size of the identity.9Select printer. The recommended method is to use a pigment-based inkjet printer such as Epson printer with DuraBrite ink. This tends to produce incredible results and works with the Teslin, although not a laser printer. The best results are achieved, even on paper Artisyn, and high quality results Artisyn nano � extreme use. If pigmented ink printer is not available, the laser printer is still a good result. Laser printers for crisp and clear results, but the ink tends to look like wax. Finally, any inkjet printer based on work fine. Based inkjet printer is the default color that most people in their home. Again, if you dye inks you use Artisyn. You must press the highest image quality settings. Printing on a sheet of paper, front and rear.10Cutting. If you use Easy Microperforation Artisyn idea, skip this tedious step. Otherwise, starting with cutting out the ID of the paper. Trace ID sizes using a butterfly bag is usually helpful. Paper cutter or X-Acto knife is also helpful.